Tag Archives: hollow shaft gearbox

China 45#Steel Planetary Hollow Shaft Transmission High Torque Speed Reduction Planetary Gearbox planetary gearbox definition

Item Description

Solution Description

 

The reducer is typically employed for reduced-pace and substantial-torxque transmission products. The motor, internal combustion motor or other large-speed working electricity is used to obtain the goal of deceleration by meshing with the huge gear on the output shaft through a gear with a small variety of enamel on the enter shaft of the reducer. The reducer will also have a number of pairs of gears with the same basic principle to accomplish the perfect reduction effect. The ratio of the number of tooth of the huge and modest gears is the transmission ratio.
 

 

SPECIFICATIONS Phase RATIO RATED TORQUE (N.m)
PLF80- Planetry Gearbox  L2 422:one 200
Adapted motor DC gear motor
Rated Input Speed (rpm) 3000/min
Max Input Pace (rpm) 6000/min
Backlash L1 ≤30Arcmin
L2 ≤35Arcmin
Fault end torque(N.m) 350
Efficiency L1 94%
L2 80%
Average lifestyle span 20000h
Operating temperature -40°~+90°
Nosie  ≤60 db
Weight (kg) L1 1.5
L2 2
IP 65
Installation method Any set up method

 

 

Generation Selection

 

forty two Series Planetary Gearbox

Backlash: ten-15 arcmin

Ratio Variety:

L1: 4,5,7,10,

L2: 12,16,twenty,25,28,35,forty,fifty,70

Frame Dimension: 42mm Enter Flange

Equipment Arrangement: Planetary Straight Teeth

sixty Collection Planetary Gearbox

Backlash: ten-fifteen arcmin

Ratio Choice:
L1: 4,5,7,ten,
L2: 16,twenty,twenty five,28,35,40,fifty,70
Frame Dimension: 60mm Enter Flange
Equipment Arrangement: Planetary Straight Tooth

90 Sequence Planetary Gearbox

Backlash: 10-15 arcmin
Ratio Choice:
L1: 4,5,7,10,
L2: 16,twenty,25,28,35,40,50,70
Body Dimension: 90mm Input Flange
Gear Arrangement: Planetary Straight Teeth

Powder Metallic Series Planetary Gearbox

Backlash: ten-15 arcmin
Ratio Variety:
L1: 4,5,7,ten,
L2: 16,20,twenty five,28,35,forty,fifty,70
Body Dimension: 42mm & 57mm
Equipment Arrangement: Planetary Straight Tooth

Correct Angle Series Planetary Gearbox

Backlash: ten-15 arcmin
Ratio Choice:
L1: 4,5,7,10,

L2: 16,20,25,28,35,forty,fifty,70
Body Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Tooth

 

Application Field

Computerized Arms

 

Assembly Line

 

3D-Printer

 

Health care -Tools

 

CNC Equipment

 

Tapping Device

 

Other Automation Devices

 

Why Decide on Us

 

ZheJiang Higher Precision Gear Transmission Co., Ltd

 

 

 

Firm
 

 

ZheJiang High Precision Gear Transmission Co., Ltd situated in HangZhou city, ZheJiang Province, China. It is a leading business devoted in precision transmission elements and technique investigation, manufacture and product sales, different series of merchandise are manufactured in its 5000 sq. meters workshop, the precision planetary gearbox and gear motor are created specially for solar vitality industry and have served many big-scale solar initiatives worldwidely. 

The study team has much more than 15 several years ordeals in this discipline, who can make certain a punctual and successful provider to meet up with customer’s particular wants. It has pasted the ISO9001 high quality administration system and CE, goods have been exported to heaps of international locations with a extensive range software in AGV, clever robot, logistic, industrial automation, solar vitality, vessel, packaging and textile and so forth.Constantly, our aim is to encourage the software of solar power industry in the entire world, and we imagine it supplies clean and sustainable energy for humanity to greater safeguard our atmosphere.

WORKSHOP

CERTIFICATIONS

FAQ

 

Q:Which areas are your goods primarily utilized in?

A:At existing, we have 2 principal products: precision planetary equipment reducer and solar geared motor. Most of the precision planetary reducers are utilized in automation fields, these kinds of as health care gear, 3D printers, door openers, tapping machines, CNC lathes and a sequence of automation tools. In addition, our photo voltaic geared motors are utilized in photovoltaic electrical power generation assignments, which are largely combined with rotary drives to push photo voltaic panels to keep track of daylight.
Q : How to select the suited planetary gearbox?
A :Very first of all, we want you to be CZPT to give relevant parameters. If you have a motor drawing, it will permit us advise a ideal gearbox for you faster. If not, we hope you can give the pursuing motor parameters: output velocity, output torque, voltage, recent, IP, sound, operating problems, motor size and electricity, and many others.
Q : What is the price tag ?
A : The principal figuring out element for the cost of each item is the order quantity. You can connect with us and let us understand every single other. I imagine that our prices, product high quality and our companies can undoubtedly make you content.

Q : Do you offer customized service?

A: Indeed, we supply custom-made companies. You only need to place ahead your needs, and we will do our very best to offer you with a plan, make ideas, and try our greatest to meet up with your requirements.

 

 

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 80/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF80- Planetry Gearbox  L2 422:1 200
Adapted motor DC gear motor
Rated Input Speed (rpm) 3000/min
Max Input Speed (rpm) 6000/min
Backlash L1 ≤30Arcmin
L2 ≤35Arcmin
Fault stop torque(N.m) 350
Efficiency L1 94%
L2 80%
Average life span 20000h
Operating temperature -40°~+90°
Nosie  ≤60 db
Weight (kg) L1 1.5
L2 2
IP 65
Installation method Any installation method
Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 80/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF80- Planetry Gearbox  L2 422:1 200
Adapted motor DC gear motor
Rated Input Speed (rpm) 3000/min
Max Input Speed (rpm) 6000/min
Backlash L1 ≤30Arcmin
L2 ≤35Arcmin
Fault stop torque(N.m) 350
Efficiency L1 94%
L2 80%
Average life span 20000h
Operating temperature -40°~+90°
Nosie  ≤60 db
Weight (kg) L1 1.5
L2 2
IP 65
Installation method Any installation method

Planetary Gearbox Basics

If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
planetarygearbox

Wheel drive planetary gearboxes

Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.

Spur gears

There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
planetarygearbox

Helical gears

A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.

Various sizes

There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
planetarygearbox

Applications

This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.

China 45#Steel Planetary Hollow Shaft Transmission High Torque Speed Reduction Planetary Gearbox     planetary gearbox definitionChina 45#Steel Planetary Hollow Shaft Transmission High Torque Speed Reduction Planetary Gearbox     planetary gearbox definition
editor by czh 2022-12-29

China factory High Precision planetary gear reducer gearbox gearhead with hollow shaft with Hot selling

Warranty: 1 year
Applicable Industries: Other
Weight (KG): 5 KG
Customized support: OEM, ODM
Gearing Arrangement: Planetary
Output Torque: 900
Input Speed: 2000rpm
Output Speed: 2rpm
Packaging Details: Pallet,Carton box
Port: HangZhou,ZheJiang

Specification

itemvalue
Warranty1 year
Applicable IndustriesOther
Weight (KG)5KG
Customized supportOEM, ODM
Gearing ArrangementPlanetary
Output Torque900
Input Speed2000rpm
Output Speed2rpm
Place of OriginChina
ZHangZhoug
Brand NameHTG
Company Profile HangZhou Hengtuo Motor Co.,ltd Locates at HangZhou city on the sea coast of the East China,near ZheJiang City . We specializes in R&D、manufacturing and sales of gear motors which have 5 series of nearly thousand varieties of gear motors including planetary gearbox,micro AC gear motors、DC gear motors、 right angle gear motors,small ac gear motor,worm RV gearbox and motor controllers etc .Factory has a first-class management team and the industry’s top research and development team, automated production lines and industry-leading manufacturing、 testing、 auxiliary equipment, and continuous equipment improvement、 upgrade、 introduce, High power low speed 16mm 20mm 22mm dc 3v-24volt metal planetary gear reducer motor and gradually realize the intelligent equipment production line .Our products are widely used in textile machine、printing machine、food machine、medical machine、convey machine、packaging machinery、work master machine、vending machine、 cement machine、computer flat knitting machine、automatic table、office equipment and solar photovoltaic equipment etc .Our products are popularly sold in domestic markets and foreign markets such as Southeast Asia、 India、Europe、America、Middle East and Australia etc. The sales volume continues to increase at a rate of more than 40% per yearWe passed ISO9001、CE 、UL、CCC and ROHS certification etc..We can satisfy you with the industry’s first technology ,quality and fast service support .Sincere cooperation with you to build beautiful Garden .Welcome to visit our factoryHangZhou HENGTUO MOTOR CO.,LTDADD: N0.108,SHANGYEJIA ROAD NORTH,HUSHAN STREET, HangZhou,HangZhou CITY,ZHangZhouG PROVINCE,CHINA. FAQ Q: Are you gear motors manufacturer ?A: Yes we are factory.Q: Where are your factory ?A: HangZhou, HangZhou, Near ZheJiang cityQ: How many worker in your factory ?A: 158 workers.Q: How to order?A: Send us inquiry → Receive our quotation → Negotiate details → High precision harmonic gearbox for CNC rotary table Confirm the sample → Sign contract/deposit → Mass production→Cargo ready → Balance/delivery → Further cooperationQ: How about Sample order?A: Sample is available for you. please contact us for details. Once we charge you sample fee, please feel easy, it would be refundwhen you place formal order.Q: Which ship way is available?A: DHL, UPS, FedEx, TNT, EMS, China Post,Sea are available.The other shipping ways are also available, High Precision Low Backlash Noise Helical Planetary Speed Gear Reduction Reducer Gearbox for 750W Rated Power Servo Motor please contact us if youneed ship by the other shipping way. Q: How long is lead time ?A: Deliver time depends on the quantity you order. usually lead time takes 3-5 working days.

Types of Bevel Gears

Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.
gear

Spiral bevel gear

Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.

Straight bevel gear

Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
gear

Hypoid bevel gear

Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.

Addendum and dedendum angles

The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
gear

Applications of bevel gears

Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.

China factory High Precision planetary gear reducer gearbox gearhead with hollow shaft     with Hot sellingChina factory High Precision planetary gear reducer gearbox gearhead with hollow shaft     with Hot selling